aluminum electrolytic capacitors (smd type) surface mount type series: s type: v endurance : 85 2000 h vibration-proof product (30g guaranteed) is available upon request. (8 Q) rohs compliant example : 4 v.dc 33 f marking color : black unitmm 4.3 -0.2 +0.1 8.3 -0.2 +0.1 4.6 3.1 0.700.2 0.700.2 -0.2 +0.1 7.8 max. 6.5 max. 5.5 max. 3.5 3.4 0.900.2 0.900.2 9.5 max. 3.4 0.650.1 0.650.1 1.8 b 10.0 8.0 5.0 4.0 0.70 1.00 5.4 5.4 5.4 10.20.3 7.70.3 1.70 within the initial limit within 10 % of the initial value within the initial limit within the initial limit after reflow soldering and then being stabilized at +20 , capacitors shall meet the after storage for 1000 h at +85 2 with no voltage applied and then bei ng stabilizedat +20 , capacitors shall meet the limits specifi ed in endurance. capacitance change dissipation factor (tan ) leakage current leakage current 10 k to following limits. frequency correction factor for ripple current aec-q200 compliant aec-q200 (with voltage treatment) shelf life resistance to soldering heat 10.0 max. 2.2 0.35 +0.15 -0.20 8.0 6.20.3 f 8.3 -0.20 e d 6.3 6.6 7.8 max. 2.6 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 2018/9/10 10.20.3 12.0 max. g 10 0.35 +0.15 1.8 0.35 +0.15 -0.20 2.2 0.650.1 1.5 0.35 +0.15 -0.20 d 6.3 c 6.6 5.3 2.6 0.650.1 1.8 0.650.1 1.0 0.35 +0.15 -0.20 h i w p k marking dimensions size code d l ab correction factor 50, 60 120 1 k frequencyhz 1.30 endurance at +85 2 and then being stabilized at +20 , capacitors shall mee t the following limits. Q200 % of the initial limit size code b(4) to d, d8(6.3) 3 z (-40 ) / z (+20 ) 15 dissipation factor (tan ) (impedance ratio at 120 hz) after applying rated working voltage for 2000 h (bi-polar:1000 h for eac h polarity) 50 63 100 z (-25 ) / z (+20 ) 7 rated voltage (v.dc) 35 25 dissipation factor (tan ) characteristics at low temperature capacitance range capacitance tolerance leakage current features specifications category temp. range rated voltage range C40 to +85 4 v.dc to 100 v.dc 1 f to 1500 f 20 % (120 hz / +20 ) i Q 0.01 cv or 3 (a) (bi-polar i Q 0.02 cv or 6 (a)) after 2 minutes (whichever i s greater) please see the attached characteristics list 8 6 4 4 2 2 3 capacitance change rated voltage 4 v.dc 6.3 v.dc R 10 v.dc 16 10 6.3 4 3 3 cap. change 1000 hours 20 % Q d(6.3) miniature 1000 hours 30 % within 20 % of the initial value 4 4 4 3 2 2 0.3 max. d 0.5 h a 0.2 b 0.2 w i p i 33 4s k l 0.3 negative polarity marking ( C ) (no marking for the bi- polar) capacitance ( f) series indentification s) or a) rated voltage v.dc (6=6.3 v.dc) lot number mark for lead - free products (black dot) pressure relief 10and larger ( )reference size downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |